How to remove and install the fuel level sensor module and fuel pump/fuel level sensor module on 2003 Mercedes-Benz C240?

First, de-pressurize the fuel system and disconnect the negative battery cable. Make sure that the fuel tank is not full. Take out the rear seat cushion, access cover and unplug the fuel level sensor module and hoses. Mark the orientation of the module and take off and install it, it should be very well positioned during its installation.

Genuine 2003 Mercedes-Benz C240 Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Pumps found

View related parts
2003 Mercedes-Benz C240 Fuel Pump
Part Number: 203-470-10-94
$259.20 MSRP: $360.00
You Save: $100.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Auxiliary Pump; Fuel Pump
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 203-470-10-94
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
Fits the following 2003 Mercedes-Benz C240 Submodels:
- 4Matic, Base | 6 Cyl 2.6 L GAS
View related parts
2003 Mercedes-Benz C240 Fuel Gauge Sending Unit
Part Number: 203-470-23-94-80
Product Specifications
- Other Name: Reman Delivery Unit; Fuel Gauge Sending Unit, Fuel Pump
- Replaced by: 203-470-23-94
- Replaces: 203-470-22-94, 203-470-23-94
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 203-470-23-94-80
- Warranty: This genuine part is guaranteed by Mercedes-Benz's factory warranty.
More Info
Fits the following 2003 Mercedes-Benz C240 Submodels:
- 4Matic, Base | 6 Cyl 2.6 L GAS

2003 Mercedes-Benz C240 Fuel Pump Parts Q&A

Q: How to remove and install the fuel level sensor module and fuel pump/fuel level sensor module on 2003 Mercedes-Benz C240?
A: First, de-pressurize the fuel system and disconnect the negative battery cable. Make sure that the fuel tank is not full. Take out the rear seat cushion, access cover and unplug the fuel level sensor module and hoses. Mark the orientation of the module and take off and install it, it should be very well positioned during its installation.